Don't allow any more than the two quick beeps – if it beeps any more it will go into programming mode so you will need to unplug the battery and start over).ħ) - Quickly set the throttle on the radio back down to the zero/idle position immediately after you hear the two quick beeps.
Fms esc over heating problems full#
We also have a video which shows the complete process at the bottom of this article.Īdditionally, we want to include written instructions for you.ġ) - Remove the prop from the plane (very important for safety).Ĥ) - Turn on your radio and set the throttle stick all the way up to full throttle.Ħ) - You will hear the ESC beep twice (two quick beeps. As a safety precaution, many modern ESCs need to be initialized and calibrated to your radio's throttle range, before the ESC will allow the motor to spin.īelow are the instructions to initialize the ESC: It indicates that the engine oil temperature is too high.Īction to take: It’s advisable to reduce speed and stop as soon as safely possible to allow oil temperature to reduce.If your controls work, but your motor doesn't power up, don't panic! It is likely that your ESC needs to be initialized. Continued driving may result in mechanical damage.ĭescription: This symbol illuminates on the VOLVO Truck dashboard, typically in amber indicating low engine oil level.Īction to take: Check and top up engine oil at your next stop.ĭescription: Symbol illuminates possible alongside the STOP warning triangle. The ECU may take preventative action by reducing engine performance by 50% or shutting down the engine when idle.Īction to take: It’s advisable to stop when safe to do so and have vehicle inspected. Have coolant levels checked and look for leaks as soon as safely possible.ĭescription: The VOLVO Trucks coolant level indicator light comes on if the coolant level is low.Īction to take: Check coolant levels and top up at next stop.ĭescription: The VOLVO Truck may experience severe engine damage due to low oil pressure indicated by the red low engine oil pressure symbol. Due to excessive coolant temperatures, the engine may shut down and can only be restarted for 30 seconds.Īction to take: It is advisable to slow down and wait if the light goes out. The ECU may take preventative action – engine power output may be reduced and engine may shut down when idle. A text in the DID may show along with the ‘i’ symbol.Īction to take: Check informational texts and ensure the fault is looked into at the next stop.ĭescription: This coolant temperature typically illuminates in red when engine coolant is overheating. This may be due to abnormal status detected by the electronic control unit. Bring the vehicle to a controlled stop.ĭescription: The ‘i’ or information indicator light will come on the dashboard when there’s a new information message.
The emergency brakes my engage, causing a wheel lockup and loss of vehicle control. In the instance that air pressure is low and remaining air volume may not be sufficient for repeated braking.
Fms esc over heating problems driver#
This light indicates an electrical or mechanical fault along with a message in the Driver Information Display (DID).Īction to take: If the CHECK light comes on, acknowledge any other warnings lights an display messages. This symbol may illuminate alongside other symbols and a message in the Driver Information Display (DID).Īction to take: Failure to stop as soon as possible may result in the engine shutting down.ĭescription: The CHECK warning light symbol comes on when there’s a specified fault that the vehicle operator should be made aware of. If the engine is on, a buzzer will also sound. Description: On Volvo Trucks, the illumination of the red STOP triangle containing an exclamation mark indicates a serious fault.
0 kommentar(er)
